High Temperature Chain Oil

Small: 4L/barrel, 18L/barrel
Large: 200L/barrel, 1000L/IBC ton barrel
Customizable: LOGO and product information (MOQ negotiable)

No rapid decomposition or hard carbon deposits under long-term high temperature.

Reduces oil consumption and smoke pollution.

Prevents oil splashing; penetrates pin-bushing clearances.

High flash point (typically > 270°C), lowering fire risk.

Rust prevention and corrosion resistance, suitable for humid environments / applications with chemical vapors.

NSF H1 certification required for food-related applications; low mist and no fabric contamination for textile industry.

Technical Specifications for High-Temperature Chain Oil (Fully Synthetic 250°C Grade)

No.	Technical Index	Unit	Typical value	Note
1	Appearance	–	Pale yellow transparent liquid	Light yellow transparent liquid，No visible impurities
2	Density (15℃)	g/cm³	0.90～0.95	Routine test standard
3	Kinematic Viscosity (40℃)	mm²/s	180～250	Affects lubrication adhesion
4	Kinematic Viscosity (100℃)	mm²/s	30～45	Key index for high-temperature lubrication
5	Viscosity Index (VI)	–	≥140	The higher, the better viscosity stability at high and low temperatures
6	Pour Point	℃	≤-30	Low-temperature fluidity index
7	Flash Point (COC)	℃	≥280	Key index for high-temperature safety
8	Continuous Operating Temperature	℃	-20～250	Applicable temperature for long-term work
9	Short-term Temperature Resistance	℃	≤280	Peak temperature resistance
10	Evaporation Loss (250℃, 24h)	%	≤3.0	Low volatility = fuel saving, less oil fume
11	Carbon Residue (Conradson)	%	≤0.5	The lower, the less likely to coke
12	Wear Scar Diameter (WSD)	mm	≤0.50	EP and anti-wear performance index
13	Water Content	–	None/Trace	None/Trace，Avoid rust
14	Total Acid Number (TAN)	mgKOH/g	≤0.5	Auxiliary index of oxidation stability
15	Rust Prevention	–	qualified	Pass salt spray test
16	Corrosion Protection	–	qualified	Adapt to humid working conditions